Request a Stand Proposal →
Technology & Electronics

MWC Barcelona 2027 stand builder and floor plan guide

Fira Gran Via • Barcelona, Spain

Veranstaltungsort

Fira Gran Via

Date Range

1 March 2027 - 4 March 2027

Sector

Technology & Electronics

MWC Barcelona 2027 at a glance

MWC Barcelona 2027 runs from Monday 1 to Thursday 4 March 2027 at Fira Barcelona Gran Via, Av. Joan Carles I, 64, in L'Hospitalet de Llobregat. The venue has eight halls linked by a walkway, and Hall 8 houses the convention centre. GSMA hosts the show, and the main halls are entered through the MWC Entrance (South). The 4YFN start-up event uses the North entrance, while the Talent Arena is held at a separate venue, Fira Montjuïc.

Floor plan and getting there

GSMA publishes the floor plan on its maps page. When we checked on 16 October 2026 the 2027 page showed only a heading and the dates, so stand locations are not public yet. Exhibitors receive theirs through GSMA's online Event Manual; look at the maps page again once your stand is allocated.

To reach the main halls by metro, change to line L9 at Collblanc or Torrassa and get off at Europa Fira. FGC trains run from Plaça Espanya to Europa/Fira, and city buses H16 and V1 serve the MWC entrance. Taxis wait at the MWC Entrance (South) on event days, and private cars drop off on c/ Salvador Espriu.

Rules that apply

GSMA's Event Manual sets the stand construction rules for MWC, including heights, contractors and deadlines. We do not repeat its limits here, because GSMA can change them between editions; read the stand construction chapter before you brief a designer.

Beneath that sit the venue's own Gran Via regulations. They give a general maximum stand height of 5 metres where the hall allows it, and say the height can vary with the event regulations. Double-deck stands with upper-floor access count as complex structures: they need authorisation from Fira, a project signed by a certified technician and, at Fira-organised events, an upper floor of no more than 50% of the allocated area. A closed space under a second level needs a professional smoke detection system. Basic rigging points come exclusively from Fira de Barcelona, and ceilings and walls must reach fire class C-s2,d0, with certificates from an accredited laboratory issued within the previous five years.

How we build for MWC

In-house production in our 6,000 m² facility and installation by our own crews suit a venue where a double-deck stand needs a signed technical project and rigging comes only from Fira, because the structure is settled at the design stage rather than on site. Barcelona sits in the European part of a service area that also takes in the Middle East, Canada, the USA and Türkiye. Technology and IT briefs are covered in more detail on our technology and IT booths page.

Request an MWC concept and quote

Send us the brief and whatever you know about your stand, and we will tell you which Event Manual and Fira rules to check first. The concept and quote cost you nothing. Get in touch.

Direct stand manufacturingInternational transport planningCoordinated local installation teamsVenue-document coordination

VAV Grup by the Numbers

6,000 m²

Production facility, Ikitelli OSB, Istanbul

Hannover

Local base: storage, quality checks, on-site support

Independent

Stand contractor working to organiser rules

Häufig gestellte Fragen

On GSMA's maps page. When we checked on 16 October 2026 it showed no plan yet, so stand locations come through the Event Manual until it does.
Fira's Gran Via regulations give a general maximum of 5 metres where the hall allows it, and add that event regulations can change that. For MWC, the Event Manual is the document that decides.
Fira treats it as a complex structure that needs authorisation and a project signed by a certified technician. At Fira-organised events the upper floor may not exceed 50% of the allocated area, and closed spaces below need smoke detection. Check the Event Manual for GSMA's own limits.
Basic anchoring points, also called rigging, are exclusive to Fira de Barcelona and are offered through its official suppliers.
Your stand size and location once GSMA confirms it, a short brief and your technical needs such as power, screens and rigging. The first concept and quote from us cost nothing.

Start Your Stand ProjectProject Brief

Share the show, city and stand size so we can define the right project scope.

Project-led delivery
In-House Factory
Portfolio on request
Technical support

Global Exhibition Stand Design & Build Locations

We provide turnkey exhibition stand design, production, and installation services at major trade show venues worldwide. Explore our local operations in your target destination.

CallWhatsAppGet Quote