Request a Stand Proposal →

Exhibition Stand Builder in Ireland

Custom exhibition stands for the RDS, The Convention Centre Dublin and Citywest – designed in Istanbul, built in our own workshop and prepared to Irish venue rules.

Building an exhibition stand in Ireland: venues and rules

Ireland's main exhibition venues are the RDS in Ballsbridge, The Convention Centre Dublin and Citywest, all in Dublin. At the CCD stand construction must be Class 1 or Class C-s3,d2, drapes need flame-retardant certificates and the venue provides all electrical supplies; RDS shows usually name exclusive electrical and rigging contractors. VAV Grup designs and builds custom stands in Istanbul to these rules.

Service area
Ireland
Proposal
Project-specific scope and quotation
Production
Own factory, Istanbul
Installation
Coordinated local installation
Main venues
RDS Dublin, The Convention Centre Dublin (CCD), Citywest Convention Centre

Local Exhibition Market Intelligence

Ireland's trade shows are concentrated in Dublin: the RDS campus in Ballsbridge, The Convention Centre Dublin and Citywest. Most shows are national in scope; international B2B events include Showcase Ireland, CATEX and DataCentres Ireland. At the CCD, stand construction must be Class 1 or Class C-s3,d2 and the venue provides all electrical supplies.

Key Exhibition Cities

  • Dublin

Major Trade Venues

  • RDS Dublin
  • The Convention Centre Dublin (CCD)
  • Citywest Convention Centre

Exhibition Preparation Checklist

  • The CCD: stand construction Class 1 or Class C-s3,d2; flame-retardant certificates for drapes; the venue provides all electrical supplies.
  • RDS: shows typically set a 2.5 m general height and allow space-only stands up to about 4 m with approved plans (check your show manual).
  • RDS shows usually name exclusive electrical and rigging contractors in the exhibitor manual.
  • Ship stand materials from Türkiye with an A.TR certificate (EU–Türkiye customs union).

Exhibiting in Ireland: venues, fairs and stand rules

Short answer: Ireland's main exhibition venues are the RDS in Ballsbridge, The Convention Centre Dublin and Citywest, all in Dublin. At the CCD stand construction must be Class 1 or Class C-s3,d2, drapes need flame-retardant certificates and the venue provides all electrical supplies; RDS shows usually name exclusive electrical and rigging contractors. VAV Grup designs and builds custom stands in Istanbul to these rules.

Main exhibition venues in Ireland

VenueCityOperatorIndoor space (official figure)
RDSDublin (Ballsbridge)Royal Dublin Society43-acre campus; total m² not published
The Convention Centre DublinDublin (Spencer Dock)The CCDThe Forum 2,721 m²; The Liffey 1,650 m²
Citywest Convention CentreDublin (Citywest)Citywest HotelOver 16,000 m² of event space

International B2B trade fairs in Ireland (next editions)

FairSectorVenueNext editionFrequency
DataCentres IrelandData centres & digital infrastructureRDS18–19 Nov 2026Annual
Showcase IrelandHome, gift, fashion, jewellery (trade only)RDS17–19 Jan 2027Annual
CATEXFoodservice & hospitalityRDS Simmonscourt16–18 Feb 2027—

Dates as published by the organisers, checked 26 September 2026. Always confirm on the official show website before booking.

Venue rules that shape your stand design in Ireland

Custom stands fail approval most often on height, fire class of materials, rigging and electrics. These are the rules the venues publish:

The Convention Centre Dublin

  • Stand construction must be Class 1 or Class C-s3,d2.
  • Flame-retardant certificates required for drapes.
  • The CCD provides all electrical supplies.
  • Organisers submit final layout plans 6 weeks before tenancy; rigging requires a submission and method statement.

Source: The CCD – Rules and Regulations (June 2023)

RDS (example from a 2026 show manual)

  • General height limit 2.5 m; space-only stands up to 4 m with approved plans, due one month before the show.
  • Display materials fire-proofed to the satisfaction of the fire authorities.
  • Electrical and rigging work through the exclusive contractors named in the show manual.

Source: Holiday World Show Dublin 2026 manual (RDS)

Rules can differ per show: the organiser's exhibitor manual for your fair always takes precedence. We read that manual before the first design sketch, not after.

Shipping a stand from Istanbul to Ireland

Customs framework: Türkiye and the EU have been in a customs union for industrial goods since 31 December 1995 (Decision 1/95). Stand materials made in Istanbul therefore move into Ireland without customs duty when they travel with an A.TR movement certificate. Since 8 July 2024 EU member states accept A.TR certificates issued electronically with a QR code. (European Commission – EU–Türkiye trade; European Commission – electronic A.TR (2024))

Exhibits that go back home: Products you display and take back to Türkiye can travel on an ATA Carnet (temporary admission for goods at fairs and exhibitions). Consumables and stand parts that stay or are used up on site cannot go on a carnet; they are declared separately. We confirm the right document set with the customs broker for each shipment. (TOBB – ATA Carnet FAQ; EU Access2Markets – ATA Carnet)

Planning timeline for a custom stand in Ireland

  1. 16–12 weeks before: book space, send us the floor plan and stand number; we propose a design and budget.
  2. 12–8 weeks before: final design, structural details for double-deck or rigged elements, material list with fire certificates.
  3. Drawing deadline (set by the venue/organiser – see the rules above): submit stand drawings for approval; order electricity, rigging and other venue-reserved services.
  4. 4–2 weeks before: production and pre-assembly in our Istanbul factory, then road or sea freight with the customs documents.
  5. Build-up days: installation, electrical connection by the venue's contractor, final check with you before opening.
  6. After the show: dismantling, return shipment or storage of reusable parts.

How VAV Grup delivers stands here

We are an independent stand contractor, not an official venue supplier. Your stand is designed and manufactured in Europe – in our factory on the European side of Istanbul – and shipped to Ireland; on site, installation is coordinated with the services the venue reserves for itself (mains electricity, rigging, sometimes floor plans). One project lead keeps the drawings, material certificates, transport and build-up schedule in one plan. Send the fair name, hall and stand number, stand size and deadline and we reply with a project-specific scope and quotation.

Facts on this page were checked against the official venue, organiser and government sources linked above on 26 September 2026. Figures are the venues' own; we do not claim past projects at every venue listed.

Our Key Services in Ireland

Custom Exhibition Stand Design

Tailor-made booth environments designed around your brand, products and visitor flow.

Exhibition Stand Construction

State-of-the-art timber, metal, and glass construction with turnkey handovers.

Country Pavilion Contractor

Turnkey national pavilions hosting exporters with unified premium branding.

Modular Exhibition Booths

Sustainable, reusable, and elegant aluminum and fabric frame solutions.

Why Work With VAV Grup in Ireland?

Turnkey Delivery

From 3D design and in-house manufacturing to logistics, venue approvals, and final dismantle. We handle everything.

Deadline-Controlled Planning

Milestones, transport windows and venue build-up slots are coordinated around the confirmed show schedule.

Venue Compliance

Required technical files, material certificates and venue submissions are coordinated according to the confirmed project scope.

Trusted by Global Brands Exhibiting in Ireland

Building custom stands at the world’s leading trade shows

HANNOVER MESSEMEDICAGITEX GLOBALARAB HEALTHAUTOMECHANIKATHE BIG 5GULFOODBAUMAMWC BARCELONAANUGA
HANNOVER MESSEMEDICAGITEX GLOBALARAB HEALTHAUTOMECHANIKATHE BIG 5GULFOODBAUMAMWC BARCELONAANUGA

VAV Grup by the Numbers

6,000 m²

Production facility, Ikitelli OSB, Istanbul

Hannover

Local base: storage, quality checks, on-site support

Sharjah

Contracted partner production facility (UAE)

Independent

Stand contractor working to organiser rules

Ready for a Quote?

Share your fair name, stand size, city/country and deadline. We will review your brief and respond with the fastest possible next step. Direct manufacturing, European project delivery, and coordinated local installation.

✓ Turnkey Production
✓ Fast Brief Review
✓ Deadline-focused
✓ Portfolio-backed

Frequently Asked Questions

The CCD's rules require stand construction to be Class 1 or Class C-s3,d2, with flame-retardant certificates for drapes.
No. The CCD's rules state that the venue provides all electrical supplies; your stand builder prepares the stand's layout for that connection.
No. SEAI states the Energy Show will not take place in 2027.
The stand is designed and manufactured directly by VAV Grup. International transport, venue documentation and local installation coordination are planned for the selected show and venue.
Send the show name, city, hall and stand number, floor plan, stand size, open sides, required functions, brand assets and deadline. VAV Grup then prepares a project-specific scope and quotation.
No. VAV Grup is an independent exhibition stand contractor hired directly by exhibitors and coordinates venue requirements for each confirmed project.

Start Your Stand ProjectProject Brief

Share the show, city and stand size so we can define the right project scope.

Project-led delivery
In-House Factory
Portfolio on request
Technical support

Global Exhibition Stand Design & Build Locations

We provide turnkey exhibition stand design, production, and installation services at major trade show venues worldwide. Explore our local operations in your target destination.

CallWhatsAppGet Quote